LED lens | LED reflector | others optic products

LED secondary optic lens(LED lens)--These products are designed with forward simulation method.
• 
  

  LED lens of the MOLUW-FH20-P type
  Type：MOLUW-FH20-P.
  Angle(FWHM)：20°.
  Dimension：H*W：7.80*16.50 mm.
  Material：Pure Optical PC.
  LED： Designed for OSRAM GD 1W LED.
  

  The MOLUW-FH20-P is an excellent LED lens design. It need not use the diffuse particle, SI02, to smooth the ray. The inner cup is slight sprayed. There are no yellow ring and image phenomenon. This lens is used optic simulation methods developed by Mithras optics. The light efficiency is good and the visual taste is nice. The volume of the MOLUW-FH20-P is small that can be used for the general lighting which is with high density of LEDs array.

  Spec.： Download spec.
  

• 
  

  LED lens of the MOLUW-FH20-PH type
  Type：MOLUW-FH20-PH.
  Angle(FWHM)：20°.
  Dimension：H*W：10.52*19.00 mm.
  Material：Pure Optical PC.
  LED： Designed for OSRAM GD 1 W LED.
  

  The MOLUW-FH20-PH is the MOLUW-FH20-P LED lens with a housing for fixing.

  Spec.： Download spec.

• 
  

  LED lens of the MCXRE-FH20-A type
  Type：MCXRE-FH20-A.
  Angle(FWHM)：20°.
  Dimension：H*W：13.3*19.27 mm.
  Material：Pure Optical PMMA.
  LED： Designed for CREE XRE Series.
  

  The MCXRE-FH20-A type is a lens with fly-eye micro textures on the top side. A Fly-eye micro texture has a convolution effect for lighting morphology. The convolution effect generates a uniform spot, but easily has glare. Mithras optics technology developed a special simulation method that can rapidly deal with the high numerical micro textures. This method can overcome the complicated high numerical mocro texures modeling and can used for various advanced fly-eye types. This method also effectively reduce the glare phenomenon. There are no spray needed, no image and no yellow ring. The light spot is uniform. Plz feel free to call us for samples.

  Spec.： Download spec.

• 
  

  MCXRE-FH20-AH
  Type：MCXRE-FH20-AH.
  Angle(FWHM)：20°.
  Dimension：H*W：15.60*22.00 mm.
  Material：Pure Optical PMMA.
  LED： Designed for CREE XRE Series.
  

  The MCXRE-FH20-AH is the MCXRE-FH20-A lens with a corresponding housing for fixing.

  Spec.：Download spec.

• 
  

  MOLCW-FH30-P
  Type：MOLCW-FH30-P.
  Angle(FWHM)：30°.
  Dimension：H*W：9.00*17.00 mm.
  Material：Pure Optical PC.
  LED：Designed for OSRAM GD 1W LED.
  

  The MOLCW-FH30-P type can used for OSRAM GD Warm White series. There are no image and yellow ring phenomenon. The inner cup is slight sprayed. The light spot is uniform.

  Spec.：Download spec.
  
  

• 
  

  MOLCW-FH30-PH
  Type：MOLCW-FH30-PH.
  Angle(FWHM)：30°.
  Dimension：H*W：10.52*19.00 mm.
  Material：Pure Optical PC.
  LED：Designed for OSRAM GD 1W LED.
  

  The MOLCW-FH30-PH type is the MOLCW-FH30-P with the corresponding housing.

  Spec.：Download spec.
  
  

• 
  

  LED lens of the ME1W-FH60-A type
  Type：ME1W-FH60-A.
  Angle(FWHM)：60°.
  Dimension：H*W：10*20 mm.
  Material：Pure Optical Polycarbonate(PC).
  LED：1 W.
  

  The ME1W-FH60-A type is a customized LED secondary lens. This lens is used for a 1W LED single chip packaged. The top of the lens is slight sprayed. The performance is satisfy the customer's demand..

• 
  

  ME1W-FH60-AH type LED lens
  Type：ME1W-FH60-AH.
  Angle(FWHM)：60°.
  Dimension：H*W：10*20 mm.
  Material：Pure Optical Polycarbonate(PC).
  LED：1 W (with housing).
  

  The ME1W-FH60-AH is the lens the same as the ME1W-FH60-A type with a corresponding housing for fixing.

• 
  

  ME5W-FH30-P type LED lens
  Type：ME5W-FH30-P.
  Angle(FWHM)：30°.
  Dimension：H*W：24.5*44 mm.
  Material：Pure Optical Polycarbonate(PC).
  LED：5 W LED.
  

  The ME5W-FH30-P is a customized siez led lens for 5W LED source. The FWHM angle is 30 degree. The inner cup is slight sprayed. The performance satisfy the customer's demand.

• 
  

  ME5W-FH60-P type LED lens
  Type：ME5W-FH60-P.
  Angle(FWHM)：60°.
  Dimension：H*W：24.5*44 mm.
  Material：Pure Optical Polycarbonate(PC).
  LED：5 W LED.
  

  The ME5W-FH60-P is one of the ME5W-FHxx-P lens series. The optic design is for large FWHM angle. The active lighting area is large. There are no imgae and light seperation phenomenon. The inner cup is sprayed slightly.

• 
  

  MS1W-FH60-A type LED lens
  Type：MS1W-FH60-A.
  Angle(FWHM)：60°.
  Dimension：H*W：8.2*13 mm.
  Material：PMMA with Diffuser-Beads.
  LED：1W LED.
  

  The MS1W-FH60-A is a early customized led lens. Bcause the led source is multi-chips package, the lens are doped SiO2 to overcome the image issue, but the efficiency is low.

• 
  

  MS1W-FHxx-A type LED lens
  Type：MS1W-FHxx-A.
  Angle(FWHM)：25°、30°、60°.
  Dimension：H*W：10*20 mm.
  Material：Pure Optical PMMA.
  LED：1 W.
  

  MS1W-FHxx-A is a early customized led lnes. The inner cup is sprayed. The performance satisfy the customer's demand.

  
  

LED reflector--The products are designed by forward simulation technique.
• 
  

  MNS1W-FH60-P type LED reflector
  Type：MNS1W-FH60-P.
  Angle(FWHM)：60°.
  Dimension：H*W：7.22*13.20 mm.
  Material：Polycarbonate (PC).
  LED： Designed for NICHIA NS3W183.
  

  The MNS1W-FH60-P is a generalization applicational LED multi-faceted reflector. The multi-faceted surfaces can generate a uniform light spot.

  Spec.：Download spec.
  
  

• 
  

  MNS1W-FH50-P type LED reflector
  Type：MNS1W-FH50-P.
  Angle(FWHM)：50°.
  Dimension：H*W：8.49*13.00 mm.
  Material：Polycarbonate (PC).
  LED： For NICHIA LED.
  

  The MNS1W-FH50-P LED reflector is design for 5050 SMD type LED. The FWHM angle is 50 degree. Plz feel free to call us for samples.

  Spec.：Download spec.
  

• 
  

  MNS1W-FH30-P type LED reflector
  Type：MNS1W-FH30-P.
  Angle(FWHM)：30°.
  Dimension：H*W：8.50*14.23 mm.
  Material：Polycarbonate (PC).
  LED： For NICHIA LED.
  

  The MNS1W-FH30-P LED reflector is design for 5050 SMD type LED. The FWHM angle is narrow. This reflector is suitable for down lamp, spot lamp.

  Spec.：Download spec.
  
  

LED BLD design. - We used a professional pattern design software and optics simulation aided for BLD.
• 
  

  LED light guide plate series
  Size：1.8"~13"。
  Thickness：0.5~3mm。
  Light Source：LED or CCFL。
  Material：PMMA or PC。
  
• Pattern-design and optics-simulation.
  Size 2"~15" requires 5~7 days.
  Size 15"~42"(LED) requires 10~15 day.
  The simulation precision：over 90％.
  

  The pattern-design for backlight module is generated by a professional patern-design software. Mithras has two BLD senior engineers who have lots of BLD optic pattern-design experiences. We know very well in all the BLD requirements, besides, we take a simulation technique, developed by Mithras optics, to obtain the tendency. By the simulation aided technique, we can modify the pattern-design before the mold developement. By the design flow process, we can complete the pattern-design in short time and obtain the uniformity that customers defined.

  
  

Fresnel lens for Solar energy
• 
  

  Diameter 100mm fresnel lens
  Dimension：W*L*H：100*100*3 mm。
  Material：PMMA or PC。
  Focal length：100 mm。
  
•